Page 1
Installation Manual CARDINAL SCALE MFG. CO. PO BOX 151 x WEBB CITY, MO 64870 8527-0579-0M Rev A Printed in USA PH (417) 673-4631 x FAX (417) 673-5001 12/14 www.detectoscale.com Technical Support: Ph: 866-254-8261 y techsupport@cardet.com 8527-0579-0M Rev A y APSPB INSTALLATION...
Page 3
Please do your part by making certain that this device is properly disposed of. The symbol shown to the right indicates that this device must not be disposed of in unsorted municipal waste programs. 8527-0579-0M Rev A y APSPB INSTALLATION...
Page 4
2. The switch controller cable wires are to be connected to the (P3) terminal block on the APSPB. Refer to Figure No. 1 for an illustration on the connector layout. 3. Referring to the labels on the APSPB and the table below, connect each wire to the terminal block.
Page 5
7. The scale is ready for normal use. OPERATION The APSPB Push Button has an approximately 3 foot cable to allow it to be placed in a convenient position for the operator. NOTE: Ensure that the cable is out of normal traffic.
Page 6
A return authorization number must be obtained for all returns and marked on the outside of all returned packages. Detecto accepts no responsibility for loss or damage in transit. 8527-0579-0M Rev A y APSPB INSTALLATION...
Page 7
This warranty covers only those Detecto products installed in the forty-eight (48) contiguous continental United States. Ph. (800) 641-2008 E-mail: detecto@cardet.com 08/27/2014 Printed in USA 203 E. Daugherty D268-WARRANTY-DET-A Webb City, MO 64870 8527-0579-0M Rev A y APSPB INSTALLATION...
Need help?
Do you have a question about the APSPB and is the answer not in the manual?
Questions and answers