Mirroring Stitches - Brother 885-V35 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
SEWING BASICS
e After reaching the end of the stitching, press
(Reverse/reinforcement stitch button)
once.
Buttonholes or bar tacking require
reinforcement stitching making this operation
unnecessary.
After the reverse stitching or reinforcement
stitching has been done, the sewing machine
stops, and the thread is cut.
Memo
Press (Start/stop button) when you want
to stop the sewing machine in the middle of
sewing without programmed thread-cutting
(for example, when you want to change the
sewing direction). The sewing machine stops
without programmed thread cutting.
Press (Reverse/reinforcement stitch
button) at the end of the stitching.
4
c
a Stop the machine and change the sewing
direction.
b Start the machine again.
c The thread is cut here.
If the power is turned off, programmed
thread-cutting will be turned off.
66
The thread is cut here.
1
2
a
3
b

Mirroring stitches

You can sew the mirror image of a stitch horizontally
(left and right).
a Turn on the machine.
The LCD comes on.
b Select a stitch.
• For details on selecting a stitch, refer to
"Selecting stitching" (page 51).
c Press on the screen.
It turns to , and the pattern displayed at
the top of the screen is mirrored.
Memo
To cancel the mirror image setting,
press .
Mirror image is not possible for buttonholes
and other stitches where
When the sewing machine is turned off, the
mirror image setting is cancelled.
shows.