Removing The Embroidery Foot - Brother 885-V35 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
EMBROIDERY

Removing the embroidery foot

a Press (Needle position button) once or
twice to raise the needle.
a Needle position button
b Turn off the sewing machine.
CAUTION
Before removing the embroidery foot, be
sure to turn off the sewing machine.
Otherwise, injuries may occur if one of
the operation buttons is accidentally
pressed and the machine starts sewing.
c Raise the presser foot lever.
a Presser foot lever
The presser foot is raised.
140
a
a
d While pressing in the lever at the back of the
embroidery foot with your finger, loosen the
presser foot holder screw, and then remove
embroidery foot "Q".
Turn the screwdriver toward the back.
a
a Screwdriver
e Attach the presser foot holder.
• For details, refer to "Removing and attaching
the presser foot holder" (page 45).