Download  Print this page

Embroidery Step By Step - Brother 885-V35 Operation Manual

Brother sewing machine operation manual.
Hide thumbs

Advertisement

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Embroidery step by step

The basic steps for embroidery are as follows.
1
Presser foot attachment
2
Checking the needle
3
Embroidery unit attachment
4
Bobbin thread setup
5
Fabric preparation
Embroidery frame
6
attachment
Pattern selection
7
8
Checking the layout
Embroidery thread setup
9
Attach the embroidery foot "Q".
For details on attaching the embroidery foot, refer to "Attaching the
embroidery foot" (page 138).
Use a needle matched to the fabric.
For details on replacing the needle, refer to "Replacing the needle" (page
41).
Attach the embroidery unit.
For details on attaching the embroidery unit, refer to "Attaching the
embroidery unit" (page 141).
For the bobbin thread, wind embroidery bobbin thread and set it in
place.
For details on setting up the bobbin thread, refer to "Winding/Installing
the Bobbin" (page 22).
Attach a stabilizer material to the fabric, and hoop it in an embroidery
frame.
For details on preparing the fabric, refer to "Preparing the Fabric" (page
144).
Attach the embroidery frame to the embroidery unit.
For details on attaching the embroidery frame, refer to "Attaching the
Embroidery Frame" (page 148).
Turn the power on, and select an embroidery pattern.
For details on selecting embroidery patterns, refer to "Selecting
Embroidery Patterns" (page 150).
Check and adjust the size and position of the embroidery.
For details on adjusting the layout and the size, refer to "Adjusting the
layout and the size" (page 161).
Set up embroidery thread according to the pattern.
For details on setting up the thread, refer to "Upper Threading" (page 31).
Embroidering Neatly 137
4

Advertisement

Table of Contents

   Also See for Brother 885-V35

   Related Manuals for Brother 885-V35

This manual is also suitable for:

V37885-v37Innov-ís 900d

Comments to this Manuals

Symbols: 0
Latest comments: