Table of Contents
Advertisement
Space Requirements
!
IP700 Series Installation Guide
All manuals and user guides at all-guides.com
You can install the IP700 Series appliance in a rack or as a standalone
item.
Rack installation
The cover of the IP700 Series appliance is designed for front-screw
mounting in a 19-inch rack. Each IP700 Series appliance requires the
following space in a rack:
•
5 inches (13 centimeters) of vertical space
•
21 inches (53 centimeters) behind the faceplate of the rack
•
6 inches (15 centimeters) behind the IP700 Series appliance to allow
the back exit fan to move air through the appliances
Do not place objects over the ventilation holes on the IP700
Caution:
Series appliance. The IP700 Series appliances might overheat and
become damaged.
Stand-alone or stacked installation
If you have more than one IP700 Series appliance, you can install the
IP700 Series appliances standalone or stacked, as follows.
•
Provide sufficient clearance (six inches) behind the IP700 Series
appliances to allow the back exit fan to move air through the IP700
Series appliances.
•
Do not remove the rubber feet on the IP700 Series appliances when
you stack them. They prevent damage to the IP700 Series appliances
and keep them from sliding against each other.
•
Do not stack the IP700 Series appliances more than three high.
•
Do not stand the IP700 Series appliances on their sides.
Space Requirements
157
Advertisement
Table of Contents
