Nokia IP710 Series Installation Manual page 123

IP700 Series Installation Guide
All manuals and user guides at all-guides.com
Alias 7: <empty>
BOOTMGR[47]>
sysinfo
Use the sysinfo command to view system information such as CPU
speed, memory size, and so forth. The command has the following form:
sysinfo
For example:
BOOTMGR[1]> sysinfo
CPU 0: 1000 MHz Pentium-III w ATC
Memory: 536870912 (512M bytes)
Disk Devices:
IO port 0x1f0 wdc0: unit 1 (wd0):
<IC35L020AVER07-0>
2501 cyls, 255 heads, 63 S/T, 512 B/S
IO port 0x1f0 wdc0: unit 0 (wd1):
<SanDisk SDCFB-8>
16 heads, 63 S/T, 512 B/S
Network Interfaces:
eth-s3p1:
flags=130<BROADCAST,MULTICAST,PRESENT>
ether 0:a0:8e:40:92:34 speed 1000M
full duplex
loop0: flags=10b<UP,LINK,LOOPBACK,PRESENT>
soverf0:
flags=2923<UP,LINK,MULTICAST,PRESENT,IPV6ONLY
>
20576MB (40188960 sectors),
8MB (15680 sectors), 15 cyls,
Variables
123