Table of Contents
Advertisement
Chapter 8: Troubleshooting
Do Not Receive a Login Prompt—Error Messages Appear
Cause
Solution Contact the appropriate Nokia customer support site as listed in the Nokia
136
All manuals and user guides at all-guides.com
Finally, use the following procedure to return the entire database to its
default settings and the new system-startup procedure. (For a description
of new system-startup procedure, see CHAPTER 4, Configuring and
Monitoring the IP700 Series Appliance.)
1.
Log in to the IP700 Series appliance as admin with Voyager.
For information about accessing Voyager and the related reference
materials, see "Using Voyager to Configure the Network Interfaces"
on page 81.
2.
Under Configuration Database Management (Config|System
Configuration|Manage Configuration Sets), choose Create a new
factory default configuration.
3.
Create the new default configuration.
The IP700 Series appliance is defective, or the file system on the IP700
Series appliance is defective.
Contact Information section at the front of this guide.
Use the full installation procedure to install a new system. The
NOTE:
new system completely replaces the contents of the drives and might be
needed to restore or reload an IP700 Series appliance. This procedure
erases any configuration database on the appliance. For the current
Release Notes, which include full installation procedure instructions, go
to the Nokia World Wide Web site support page (for URLs, see "Nokia
Contact Information" on page 3).
IP700 Series Installation Guide
Advertisement
Table of Contents
