NetApp AFF A300 Manual page 10

b. Verify that the
Restored
key query
c. You can safely shut down the node.
4. If the
Key Manager
a. Enter the onboard security key-manager sync command:
Enter the customer's onboard key management passphrase at the prompt. If the passphrase cannot be
provided, contact NetApp Support.
mysupport.netapp.com
b. Verify the
Restored
query
c. Verify that the
Key Manager
d. Go to advanced privilege mode and enter
e. Enter the command to display the key management backup information:
onboard show-backup
f. Copy the contents of the backup information to a separate file or your log file. You'll need it in disaster
scenarios where you might need to manually recover OKM.
g. Return to admin mode:
h. You can safely shut down the node.
Shut down the impaired controller - AFF A300
You can shut down or take over the impaired controller using different procedures,
depending on the storage system hardware configuration.
Option 1: Most configurations
After completing the NVE or NSE tasks, you need to complete the shutdown of the impaired node.
Steps
1. If the impaired node isn't at the LOADER prompt:
If the impaired node displays... Then...
Waiting for giveback...
System prompt or password
prompt (enter system password)
8
column equals
type displays onboard
column shows
yes
type shows onboard, and then manually back up the OKM information.
set -priv admin
Press Ctrl-C, and then respond
Take over or halt the impaired node from the healthy node:
failover takeover -ofnode impaired_node_name
+
When the impaired node shows Waiting for giveback..., press Ctrl-C,
and then respond y.
+
yes for all authentication keys:
and the Restored column displays anything other than yes:
security key-manager onboard sync
for all authentication keys:
y when prompted to continue:
y
security key-manager
security key-manager key
set -priv advanced
security key-manager
when prompted.
storage