Features; Data Plate; Scope Of Delivery; Standard And Optional Accessories - Miele H 7660 BP AM Operating And Installation Instructions

Features

A list of the models described in these
operating and installation instructions
can be found on the back page.

Data plate

The data plate located on the front
frame of the oven is visible when the
door is open.
The data plate states the model
number, the serial number, and
connection data (voltage, frequency,
and maximum rated load).
Have this information available if you
need to contact Miele so that any
issues can be rectified as quickly as
possible.

Scope of delivery

- Operating and installation
instructions for using the oven
- Precision probe
- Screws for securing the oven to the
cabinet niche
- Descaling tablets and a plastic tube
with suction cup for descaling the
steam injection system
- Various accessories
24
Standard and optional
accessories
Features will vary depending on
model.
The side runners, universal tray, and
wire rack (or "rack" for short) are
supplied as standard with the oven.
Depending on the model, your oven
may also come supplied with some of
the accessories listed here.
All accessories and cleaning and care
products in these instructions are
designed to be used with Miele Ovens.
These can be ordered from the Miele
web store, Miele Customer Service, or
from your Miele dealer.
When ordering, please have your model
number ready along with the desired
accessories.
Side runners
Side runners for accessories are
installed on either side of the oven
compartment for shelf levels .
The shelf level numbers are indicated
on the front of the oven frame.
Each level consists of 2 rails, one above
the other.
The accessories (e.g., the wire rack) are
pushed into the oven between the two
rails.
The FlexiClip telescopic runners (if
present) are installed on the lower rail.
You can remove the side runners (see
"Cleaning and care of the oven –
Removing the side runners with
FlexiClip telescopic runners").