Miele H 7660 BP AM Operating And Installation Instructions page 90

Roasting

Risk of injury caused by hot
surfaces.
The probe can get hot. You could
burn yourself on it.
Use pot holders when removing the
probe from its socket.
Delaying the start of a cooking
program with probe
You can also delay the start of the
cooking program to a later time.
 Select
Start at .
You can estimate approximately when
the food will be ready as the duration of
the cooking program is about the same
as if you were cooking food without
using the probe.
You cannot set Duration
because the total cooking duration is
determined by when the set core
temperature is reached.
90
and Ready at
Time-left display
If the temperature set for a cooking
process is above 285°F (140°C), the
estimated duration remaining (time left)
will appear on the display.
The time left is calculated from the
cooking temperature selected, the set
core temperature, and the progress of
the core temperature as it rises.
The time left first shown is an estimate.
As the cooking process continues, the
time left is revised continuously, and a
more accurate figure is shown.
The time left will be deleted if the
cooking temperature or core
temperature is changed or if a different
operating mode is selected. If the door
is opened for a longer time, the time left
will be recalculated.