Page 1
Instructi ons for installati on and use English Montage- und Gebrauchsanleitung Deutsch Installati e en gebruikshandleiding Nederlands Manual de instalación y de uso Espanõl Manual de instalação e uti lização Português Manuale di installazione e di uso Italiano More documents on: www.zodiac.com H0354600.F - 2015/12...
It is prohibited to distribute or modify this document in any way without authorisation from • Zodiac®. Zodiac® is constantly developing its products to improve their quality; therefore, the • information contained in this document may be modified without notice.
1.2 I Technical specifications and marking 1.2.1 Technical specifications 6 - MX 8 PRO Cleaner size (L x W x h) 31 x 19 x 22 cm 41 x 19 x 22 cm Package size (L x W x h) 102 x 23 x 37 cm Cleaner weight 2.5 kg...
❷ Installation 2.1 I Setup Hose length necessary : Cleaner : Hose sections : Pool valves : Brush socket : Skimmer : Filtering pump : Filter Brush socket connection example 2.2 I Hose section assembly 2.2.1 Determine the number of sections you need •...
2.3 I Hydraulic connection • Stop the filtration pump. • Clean the skimmer basket, the filtration pump pre-filter and the filter if necessary. 2.3.1 Connection to the brush socket section : Hose Flow regulation valve Conical adaptor Brush socket : 45° elbow (optional) : Rotating 45°...
Page 7
2.3.3 "Cyclonic™ Leaf Catcher" connection (according to model) • Connect the leaf catcher to the hose which is closest to the brush socket or the skimmer (see image • Tilt the leaf catcher by following the indications: "PUMP" = filtration pump side / "CLEANER" = cleaner side (see image •...
❸ Use 3.1 I Operating principle The hydraulic cleaners connect to the filtration system (either to a brush socket or a skimmer); they use the filtration pump's energy to move around the pool randomly. The side climbing capacity varies according to the shape of the pool and the available water flow.
3.4 I Adjusting the water flow • The filtration pump must be operating. • Check the water flow regularly to ensure the best possible cleaning performance and to make it easier for the cleaner to climb the sides. • The cleaner is equipped with a flow regulator which automatically adjusts the water flow through the cleaner. It indicates whether the water flow is ok or excessive: YELLOW = flow ok / RED = flow excessive : Flow regulator : Control...
3.5 I Choice of suction mode: small or large debris (according to model) Before starting this operation and to avoid serious injury: • Stop the filtration pump. • Disconnect the cleaner from the hose. • The cleaner has a suction adaptor; it is located under the cleaner. •...
❹ Maintenance • The device must be cleaned regularly using clean or slightly soapy water. Do not use any solvents. • Rinse the device generously using clean water. • Do not let your device dry in the sun by the pool. 4.1 I Cleaning the filtration pump pre-filter •...
4.3 I Removing debris from the motor Before starting this operation and to avoid serious injury: • Stop the filtration pump. • Disconnect the cleaner from the hose. • Press the button on the top and lift the lid (see image •...
4.5 I Storage and wintering • For wintering, drain off all the water from the cleaner (damage caused by frost is not covered by the warranty). • Clean the whole device and the hoses in clean water then leave to dry. •...
Page 14
Votre revendeur Your retailer Modèle appareil Appliance model Numéro de série Serial number Trouvez plus d’informations et enregistrez votre produit sur More informations and register you product on www.zodiac.com ZODIAC® is a registered trademark of Zodiac International, S.A.S.U., used under license.