Bowflex Ultimate 2 Assembly Instructions Manual page 5

Bowflex Ultimate
Part B
Release the Seat Rail Securing Device
Step 1: Secure the Seat Rail Securing Device
1-1 With your inside foot on the machine base, hold the Seat Rail with
one hand and push your shoulder into it lightly (Figure 8).
1-2 Continue to hold the Seat Rail with one hand and your shoulder. Use
your free hand to unlock the Seat Rail Securing Device (Figures 8
and 9) until it releases (Figure 10).
Step 2: Lower the Seat Rail
2-1 When the Seat Rail Securing Device releases, use both hands to
hold onto the Seat Rail (Figure 11).
2-2 Use both hands to carefully lower the seat down into the horizontal
position (Figure 12).
WARNING Do not stand on the base below the Seat Rail when you
lower it. This may cause injury.
WARNING Always use both hands to lift and lower the Seat Rail.
Bend at the knees when lifting or setting down the Seat Rail.
Failure to use proper lifting techniques may cause injury.
2 Seat Rail Securing Device Addendum
®
Figure 8
Figure 9
Figure 10
Figure 11
Figure 12
4