Bowflex Ultimate 2 Assembly Instructions Manual page 34

33
STEP 24
Parts:
• Ab Crunch Assembly (from step 22)
• Ab Back Pad (Ab Box)
• Roller Pads (Ab Box)
• Middle Pad (Ab Box)
• Roller Pad Shaft (Ab Box)
• End Caps (Ab Box)
Tool:
• Hex Key (3/16")
24-1 Place the Middle Pad between the arms on the
bracket. Slide the Roller Pad Shaft through bracket
and the Middle Pad then install Roller Pads and
End Caps.
24-2 Align the Ab Back Pad with the wider end pointing
toward the Handlebars.
24-3 Install and completely tighten hardware.
Hardware for this step is in the
Hardware (1:1):
hardware bag in the AB BOX.
4 Pan Head Allen Bolt (5/16" X 1")
STEP 25
Parts:
• Ab Crunch Assembly (from step 23)
Tool:
• Wrench (1/2") - or Adjustable Wrench
25-1 Undo the 1/2" bolt from the bracket at the upper
end of the cable and use the same 1/2" bolt to
attach the bracket to the tab on the Pivot Arm.
Assembling Your Bowflex Ultimate
Roller Pad
Shaft
Ab Back Pad
4 Washers (5/16")
Bracket Arms
Pan Head Allen Bolt
Ab Pivot Arm
2
®
Middle Pad
Roller Pad
Washer
End Cap
Tab
Bolt