Bowflex Ultimate 2 Assembly Instructions Manual page 4

3
Bowflex Ultimate
Part A
(continued)
Step 4: Latch the Seat Rail Securing Device
4-1 Insert the Seat Rail Securing Device into the hole in the Seat Rail
until it clicks (Figures 4, 5, 6).
Step 5: Make sure that the Seat Rail is secured.
5-1 Stand to the side of the machine base and Seat Rail.
WARNING Do not stand on the base below the Seat Rail when you
pull on it. This may cause injury.
5-2 Pull down on the Seat Rail to make sure that the Seat Rail Securing
Device is secured (Figure 7).
2 Seat Rail Securing Device Addendum
®
Figure 4
Seat Rail
Securing
Device
Seat Rail
Figure 5
Figure 6
Figure 7