Bowflex Ultimate 2 Assembly Instructions Manual page 37

Cable Installation STEP 2
Tool:
• Hex Key (7/32")
a. In Box 4 Locate a Floating Pulley Assembly and a
Single Pulley Assembly with two Cheeks.
(See Figure A)
b. Feed the cable through the Floating Pulley Assembly.
(See Figure B)
c. Route the cable behind the Side Plate and wrap over
the Single Pulley Assembly. (See Figure C)
d. Install Single Pulley with cable on the back side of
the Lat Tower as shown. (See Figure D)
Wrap Cable Over
Single Pulley Assembly
Installing Your Bowflex Ultimate
Washer
Pan Head Al-
len Bolt
Route Cable Through
Behind Side Plate
Figure C
2 Cables
®
Floating Pulley Assembly
Pulley
Figure A
(Rod Pack Removed For Clarity)
Route Cable Through
Floating Pulley Assembly
Figure B
Figure D
36
Single Pulley Assembly
Cheeks
Button Head Screw
Washer