Specifications - Vitek VT-1311 Manual Instruction

Rising up and volume
Using hair dryer in any mode of heating/
any speed from slight to maximal, dry out
hair roots beginning from backside of your
head (10).
Styling your hair
Set switches (6, 7) into positions of slight heat-
ing and slow speed correspondingly, attach
concentrating nozzle (1) to provide directed
airflow.
Divide your hair into locks and start creating
hairstyle you need using round brush for setting
hair. While styling, direct airflow straight on your
hair in any direction you want.
If necessary, direct air jet on each lock for
2-5 seconds to fix it. Time of setting locks you
should determine on your own taking into ac-
count type of your hair.
«Cool» air supply
This model has a cool shot button for fixing
your hair. Press and hold down the cool shot
button (4) « » – it enables to keep the cre-
ated style.
«Turbo» mode
The «turbo» button (5) is intended for short-
term increasing of temperature.
Diffuser (8)
The air flow diffused by the diffuser (8) enables
soft drying and adds volume to your hair. Spe-
cial «fingers» volumize your hairstyle by direct-
ing the air flow right to the hair roots.
PROTECTION AGAINST OVERHEATING
The appliance is equipped with function of
protection against overheating. This function
switches the appliance off if temperature of
outgoing air is higher then admitted. If hair
dryer is switched off during operation, turn it
off by setting switch (6) into position «0», take
power cord plug out of wall outlet, examine if
air inlet or outlet openings are blocked, leave
the appliance for a while for cooling down
for 5-10 minutes, then switch it on again. Do
not block air openings while using hair dryer
and avoid your hair getting inside its air inlet
opening.
CLEANING AND MAINTENANCE
This hair dryer is intended for household usage
only.
• It is recommended to remove air inlet grill (3)
and clean it from time to time.
• Set switch (6) into position «0» and discon-
nect the appliance from power supply.
• Turn the grid (3) counterclockwise and re-
move it. Clean the grid with a brush, install
the grid back to its place and turn it clockwise
until bumping.
• Wipe hair dryer housing with damp cloth and
wipe it dry afterwards.
• Do not use solvents or abrasives for cleaning
of the hairdryer body.
STORAGE
• Unplug power cord from wall outlet when hair
dryer is not in use.
• Do not wind power cord around the appli-
ance as doing so may cause cord's mal-
function. Handle power cord carefully, do
not pull, twist or stretch it, especially near
the plug and the place of connection with
appliance housing. If power cord is twisted
during operation, straighten it from time to
time.
• Eyelid for hanging (9) is provided for conve-
nient storage. You can hang the appliance
this way on condition there is not any pos-
sibility of water dropping on the appliance.
• Store hair dryer at a place inaccessible by
children.
• Keep the hairdryer in a dry cool place out of
reach of children and disabled persons.
DELIVERY SET
Hair dryer – 1 piece
Concentrating nozzle – 1 piece
Root boost attachment – 1 pc.
Diffuser – 1 pc.
Warranty certificate - 1 pc.
Operating manual – 1 piece

SPECIFICATIONS

Power supply: 220-240 V ~ 50 Hz
Rated input power: 2000-2400 W
The manufacturer preserves the right to
change design, structure and specifications
5
ENGLISH