Table of Contents
Advertisement
CHANGING THE
WARNING! If engine is hot, oil can discharge quickly.
Ensure engine is switched off and the fuel tap is in the 'off' position.
Oil Filler Cap
1.
Using the screwdriver provided loosen the 2 screws and open the oil/
service /air filter access panel.
2.
Unscrew the oil filler cap and remove.
3.
Screen the oil discharge pipe into the
4.
Tilt your REDBACK Generator forward
suitable container.
5.
Using the oil container provided, fill the REDBACK
Generator with 450mI of 10W30 oil.
6.
Unscrew and remove the oil discharge pipe.
7.
Refit the oil filler cap and tighten finger tight.
8.
Tilt your REDBACK Generator side
that
the oil alarm float is level,
9.
Refit
the
oil/ service /air filter access panel,
provided tighten the 2 screws.
All manuals and user guides at all-guides.com
OIL
Oil
Discharge Pipe
oil
reservoir and tighten.
and
pour the oil
to
side
a
few times to ensure
using
the
into
a
screwdriver
19
Hide quick links:
Advertisement
Table of Contents
