Table of Contents
Advertisement
STARTING
YOUR
CAUTIONS! Before starting your REDBACK Generator, make sure there is
no equipment connected to the AC or DC sockets. Equipment may start
suddenly when connected, causing possible injury.
1. Ensure
the
2
white battery connectors inside the battery access panel
are connected
2. Ensure the fuel
NOTE: Switch the fuel tap to the "off" position when the REDBACK Generator
is not in use
There are
3
ways to
start, easy recoil pull start and remote start. Key Start: Turn the key
to
the 'start' position
will start. Once started, release the key. If it does not start after 2 seconds
repeat the process. Holding the key "on" for long periods will drain the
battery. Use small bursts until the REDBACK starts.
Pull Start : Pull the easy recoil starter cable until you feel resistance, then
pull quickly to
start
NOTE: The key MUST be in the 'on' position in order for the easy recoil pull start and to work.
All manuals and user guides at all-guides.com
GENERATOR
as
per the 'Quick Setup Guide'.
tap
is
in the 'on' position.
start
your REDBACK Generator, key
and
hold for 2 seconds, your
the
generator.
REDBACK Generator
12
Hide quick links:
Advertisement
Table of Contents
