Turning The Printer Off - Canon LASER SHOT LBP-2410 User Manual

The lamps will illuminate and the printer will initiate a self-diagnostic test.
If no abnormality is detected, the Ready lamp (blue) will illuminate and the printer
will be ready to print.

Turning the Printer OFF

This section describes how to turn OFF the power.
IMPORTANT
•
If the printer is used on a network, confirm that it is not printing data from another
computer before turning the printer OFF.
•
When the power switch is turned OFF, any print data remaining in the printer memory will
be deleted. Therefore, confirm that all print data you need is printed before turning OFF
the printer.
•
Do not turn OFF the printer in the following status.
- When printing is taking place
- While running a self-diagnostic test immediately after turning ON the printer
1
Press the power switch.
The switch will be flush with the surface of the printer.
IMPORTANT
When the power switch is not depressed, the power consumption is 0 W.
Illuminate
Turning the Printer ON/OFF
1
1-11