Canon LASER SHOT LBP-2410 User Manual page 296

1
Turn OFF the printer and unplug the power cord from the AC
outlet.
2
Remove all interface cables and the power cord.
3
Remove the 2 screws, then remove the network board.
Store the network board in the protective bag that it came in.
IMPORTANT
•
Do not touch the network board parts, printed wire, or connectors with your hands.
•
The screws that were removed will be required when installing the protective plate.
Put them where they will not get lost.
4
Attach the protective plate on the expansion board slot and
secure it with the screws.
5
Connect the power cord and all interface cables.
6
Connect the power plug into the AC outlet.
Installing the Network Board (AXIS 1611)
6
6-17