Viega Grundfix Plus Instructions For Use Manual page 21

Grundfix Plus Control backflow trap type 3
Clamping strip configuration 20 m cable
Pos. cable
5 conductor 3
6 conductor 4
11 conductor 2
12 conductor 1
▶ Insert the battery fuse (right).
INFO!
On delivery, the battery fuse is attached to the inside
of the casing with adhesive tape.
NOTICE!
Depending on the length of the connection cable, a
jumper may be required to make a connection onto the control.
An incorrect jumper position can lead to malfunctions. Back
flow protection is no longer ensured.
▶ When using the cable set (20 m, art.-no. 483 500), place jumpers
onto both contacts (see illustration).
Functions Marking on
the connection
strip
motor connec‐ motor -
tion
motor connec‐ motor +
tion
Pressure Sensor
switch
Pressure Sensor
switch
Handling
21