Siruba C007L Instruction Book page 16

C007L/C007LX 一般車 定位器之安
裝與調整
1. 將隱藏式定位器①壓入車頭長溝②後，再以
螺絲③鎖緊。( 圖 8)
2. 在連接各部接線或接頭時應注意先關閉電源
開關。
3. 確認針棒在上定位時，車頭上之記號①應
與手輪②上所標示的刻劃③上方一小刻劃對
齊。( 圖 9)
P12
1
3
2
1
C007L/C007LX INSTALLATION AND
ADJUSTMENT OF SYNCHRONIZER
1.Press the hidden synchronizer ① into the
long channel of the machine head ② ,and
then tighten the screw ③。(Fig. 8)
2.Before connecting each wires or plugs,
please check that all the electric switches
are turned off.
3.Ensure needle bar is at the highest
position, and the symbol on machine head
should be aligned with one upper scale at
the hand pulley.(Fig. 9)
2
3
圖 8/Fig.8
圖 9/Fig.9