Cleaning The Milk Pipework (Maintenance Program) - Miele CM 6160 Instruction Manual

 Insert the rinse valve into the right
aperture in the drip tray cover and
confirm with OK.
The milk pipework will now be rinsed.
Cleaning the milk pipework
(maintenance program)
The
Clean milk pipework
program lasts for approx. 15 minutes.
You need 1 stick of cleaning agent for
milk pipework for the maintenance
program.
 Tap .
 Select
Maintenance
.
pipework
 Confirm with OK.
The process will start.
 Follow the instructions in the display.
Remove the water container. Fill it with
cleaning solution (see Operating
Instructions) and replace it.
the display.
Preparing the cleaning solution
For optimum cleaning results, we
recommend using the Miele Cleaning
Agent for milk pipework. The cleaning
maintenance
| Clean milk
will appear in
Cleaning and care
agent has been specially developed for
use with Miele Coffee Machines and
prevents damage to the appliance from
unsuitable cleaning agents.
You can order the cleaning agent for
milk pipework from the Miele online
shop, from Miele Service, or from your
Miele dealer.
 Place 1 stick of milk pipework
cleaning agent in a container and add
300 ml of lukewarm water. Stir the
solution with a spoon until the
cleaning agent powder has fully
dissolved.
 Remove and empty the water
container.
 Pour the prepared cleaning solution
into the water container. Replace the
water container.
 Follow the further instructions given
in the display.
 If prompted to do so in the display,
rinse the water container thoroughly
with clean water. Make sure that no
cleaning agent is left in the water
container. Fill the water container with
water.
The cleaning process is complete when
the drinks menu appears.
63