Initial Commissioning - Miele CM 6160 Instruction Manual

Initial commissioning

Before using for the first time
 Remove any notices from the
machine.
 Remove the protective film from the
drip tray cover and place the drip tray
into the lower panel.
 Place the coffee machine on a level
flat surface that is not sensitive to
water (see "Installation").
Clean the appliance before filling it
with water and coffee beans. Refer
to the relevant instructions in
"Cleaning and care"; for example,
clean the bean container with a soft,
dry cloth.
 Clean the water container, the bean
container, and the central spout.
 Remove the water container and fill it
with fresh, cold tap water. Only fill the
water container up to the "max."
marker and then refit it in the
machine.
 Take the lid off the coffee bean
container, fill the container with
roasted coffee beans, and replace the
lid.
24
 Insert the plug of the coffee machine
into the socket.
Switching on for the first time
 Press the On/Off button  if nothing
is visible in the display.
Selecting the display language
 Select the desired display language.
You might also be asked for your
location.
Setting up the network (Miele@home)
You can connect your coffee machine
to your Wi-Fi network.
The following appears in the display
during set-up: Set up "Miele@home"
Useful tip: You can also choose to set
up Miele@home for your coffee
machine at a later point. In this case,
select .
Skip
 Make sure that your Wi-Fi network
signal is sufficiently strong in the
place where you want to set up your
coffee machine.
 Tap .
Continue
 Select the connection method you
wish to use.
 Follow the instructions provided in
the coffee machine display and in the
Miele app.
Connection successfully established
appear on the display.
 Tap
Continue to proceed with the set-
up.
will