Initial Commissioning; Before Using For The First Time; Switching On For The First Time - Miele CVA 7845 Operating And Installation Instructions

Initial commissioning

Before using for the first time

 Connect the coffee machine to the
water and electricity supplies.
 Install the coffee machine.
 Remove any notices from the
machine.
 Remove the protective foil from the
drip tray cover.
 Clean the water container, the bean
containers, and the central spout.
Have the following to hand (included
with delivery) when setting the machine
up for the first time:
- Miele Cleaning Cartridge
- Miele Descaling Cartridge

Switching on for the first time

 Touch the On / Off button .
Selecting the display language
 Select the desired display language.
You might also be asked for your
location.
The choice of location determines how
the time of day is displayed, e.g., in
the 12 or 24-hour format, as well as
how units are displayed and so on.
Setting up the network (Miele@home)
You can connect your coffee machine
to your home Wi-Fi network.
When you start it up for the first time, it
shows the following in the display:
up Miele@home?
26
Useful tip: You can also choose to set
up Miele@home for your coffee
machine at a later point. In this case,
select Skip
 Make sure that your Wi-Fi network
signal is sufficiently strong in the
place where you want to set up your
coffee machine.
 Tap
Continue
 Select the connection method you
wish to use.
 Follow the instructions provided in
the coffee machine display and in the
Miele app.
Connection successfully established
appears in the display.
 Touch
Continue
set-up.
Setting the date
 Set the current date and tap OK.
Setting the time
 Set the current time of day and
tap OK.
If the coffee machine has been
connected to a Wi-Fi network and
signed into the Miele app, the time will
be synchronized based on the location
setting in the Miele app.
Setting the water hardness
Your local water authority will be able
to tell you the hardness of the water in
your area.
Set
More information can be found under
in "Water hardness" under "Settings".
.
.
to proceed with initial