Advertisement
Quick Links
Assembly Instructions for
Manhattan Collection
Everett Collection
CALL US FIRST
1-877-PREPAC1
1-877-773-7221
Mon - Fri
7am - 4pm PST
10am - 7pm EST
•
For help with assembly
•
If you have received a damaged or defective part or
are missing hardware.
We will process replacement parts
less. Parts are shipped via
Before you call please:
1) Record the following information from the shipping
label on the outside of the box. You will need it for
warranty purposes:
• Ship To Name
• Sales Order Number
2) Note the
product model number.
3) Review the contents of your shipment to determine
what you are missing. This unit is shipped in 2
cartons. Make sure you have received both.
Online Option:
Fill out the Parts Order Form on our website.
Go to www.prepacmfg.com and choose
Parts Order from the Support menu
Required Tools
Screwdrivers
in 2 business days or
UPS Ground or mail.
Phillips Head
Flat Head
Hammer
Cubbie Bench
Model #
EMC-5022
E-5022-EVE
This product is shipped in
Optional Tools
Using a power screwdriver
will speed up assembly.
Caution
Do not over tighten any screw.
The last few turns of each screw
should be done very slowly or by hand.
1 carton
1 of 1
Prepac Manufacturing Ltd.
6705 Dennett Place
Delta, BC V4G 1N4
LB-0614
2007-06-25
Advertisement
Related Manuals for Prepac EMC-5022
Summary of Contents for Prepac EMC-5022
- Page 1 Optional Tools Required Tools Screwdrivers Phillips Head Using a power screwdriver will speed up assembly. Prepac Manufacturing Ltd. Flat Head Caution 6705 Dennett Place Do not over tighten any screw. Delta, BC V4G 1N4 The last few turns of each screw...
-
Page 2: Hardware Identification
Hardware Identification 2" Confirmat Screws 15mm Zinc Cam Green Twister Dowel Blue Rapid Rod (16) (20) RM-0001 RM-0103 RM-0501 RM-0583 ¾” Nail 12mm Zinc Cam Plastic Dowels (26)* RM-0022 RM-0502 RM-0072 *More than required Cabinet Parts Left Side (1) Profiled Top (1) Center Gables (2) Right Side (1) Solid Wood Top... - Page 3 STEP 1 Estimated Time: 3 minutes Insert large cams into holes on left and right sides Right Left Side Side Make sure arrow on cam faces hole for connecting bolt STEP 2 Estimated Time: 3 minutes Insert large cams into holes on underside of shelf STEP 3 Estimated Time: 3 minutes Insert 8 small cams into both stabilizers*...
- Page 4 STEP 4 Estimated Time: 5-10 minutes Screw green twister dowels into the side and rear of each leg Rear Legs Front Legs STEP 5 Estimated Time: 5 minutes Attach legs to each side and lock cams using a flat head screwdriver Front Rear Left Side...
- Page 5 STEP 6 Estimated Time: 5 minutes Insert green twister dowels into the two holes at the front of the left and right sides Insert blue rapid rods into the two remaining holes on the left and right sides FRONT Left Side Right Side FRONT STEP 7...
- Page 6 STEP 8 Estimated Time: 5 minutes Attach bottom (C9) to the left side and tighten cams with a flathead screwdriver Unlocked Locked Turn 210° STEP 9 Estimated Time: 5 minutes Attach right side bottom and stabilizers and tighten cams with a flathead screwdriver Page 6 of 8...
- Page 7 STEP 10 Estimated Time: 5 minutes Attach center gables (C3) to the bottom with Confirmat screws Confirmat Screws STEP 11 Estimated Time: 5 minutes Screw 4 green twister dowels into underside of top as shown Hammer plastic dowels halfway into the center holes on the underside of the top Attach top and tighten cams on left and right sides Unlocked...
- Page 8 STEP 12 Estimated Time: 5 minutes Nail backer to top and sides as shown. Attach to the top and sides only Furniture Care Q&A How do I clean your products? We recommend that you simply wipe your products with a clean, damp cloth and then dry immediately with another clean cloth to Give Us maximize the life span and look of your unit...
Need help?
Do you have a question about the EMC-5022 and is the answer not in the manual?
Questions and answers