Installing The Color Image Scanner Cartridge Is-12; Removing The Bj Cartridge - Canon K10158 User Manual

If the print head is overheated, it may not move to the centre
immediately. Wait a few minutes for the print head to cool down. Never
attempt to move the cartridge manually by pushing it or pulling on the
film cable.
3.
Remove the BJ Cartridge and install a new BJ Cartridge. Follow the
same procedure used to replace a Color BJ Cartridge BC-11e with a
Black BJ Cartridge BC-10. ( 72)
Dispose of the old BJ Cartridge immediately.
You may want to place it in a plastic bag to prevent spillage from the
print head.
4.
Press the CARTRIDGE button.
The cartridge holder moves to the home position and the printer
starts cleaning the print head. After print head cleaning is
completed, the printer is ready for operation.
Installing the Color Image Scanner Cartridge
IS-12
The printer can be converted to a colour image scanner by installing the
optional Color Image Scanner Cartridge IS-12. This section describes
how to install and remove the Scanner Cartridge. For details about
operating the printer as a scanner, see the Color Image Scanner
Cartridge IS-12 User's Manual.

Removing the BJ Cartridge

Follow this procedure to remove the BJ Cartridge.
1.
Check the printer POWER lamp and make sure that it is on. If the
lamp is off, press the POWER button to switch the printer on.
2.
Press the CARTRIDGE button. The cartridge holder moves to the
centre.
You must install and use the IS Scan 1.20 scanner driver or higher. Earlier
versions of this scanner driver do not work correctly with the BJC-50.
Chapter 6 Maintaining the Printer
6
73