Canon K10158 User Manual page 66

6.
Remove the new battery pack from its packaging.
7.
Align the mark on the printer ( ) with the mark on the battery pack
( ) and insert the left end of the battery pack into the printer at a
slight angle.
8.
Push in the right side of the battery pack to lock it in place.
9.
Close the front cover.
10.
If you have just installed a new battery pack, you must allow it to
charge before you can use it. Just leave the AC adapter connected to
the printer and the power outlet. The battery pack will charge while
the printer is switched off or on. About six hours (maximum) is
required for the battery pack to fully charge.
If you have replace an exhausted battery pack, dispose of the battery
pack according to the regulations in your country. For details, contact
your Canon Authorised Dealer or Canon Representative.
Chapter 6 Maintaining the Printer
6
65