Canon K10158 User Manual page 17

Operation panel
Allows you to operate some functions.
Auto Sheet Feeder ASF-50 connector
Connects the optional Auto Sheet Feeder ASF-50 to the printer.
Power connector
Connects the printer to the AC adapter.
Power lock switch
After the power lock switch is slid to the right, you can press the
POWER button to switch the printer on and off. After the power lock
switch is slid to the left, you cannot switch the printer on, even if you
press the POWER button. This prevents the printer from being
switched on accidentally while it is being transported. Before
transporting the printer, always slide the power lock switch to the left.
Otherwise, leave the power lock switch at the right position so you can
operate the POWER button normally to switch the printer on and off.
Battery pack
The Canon Li-Ion Battery LB-50 provides power to the printer when
the AC adapter is not connected. When the AC adapter is connected, the
printer is powered from the AC adapter. When the battery pack requires
recharging, the CHARGE/ERROR lamp will start flashing green. To
recharge the battery pack, connect the AC adapter to the printer and to a
power outlet. When the battery pack is fully charged, the
CHARGE/ERROR lamp will go off.
Battery pack release
Push to the right to release the battery pack so you can remove it. Do
not remove the battery pack unless you are going to store the printer for
a prolonged period (three months or more).
Front cover
When closed, covers the battery pack. Folds down so you can feed
paper and other media to the printer. Open the front cover only when
you are feeding paper or other media into the printer.
Feed slot
Allows you to feed one sheet of paper or other media for printing.
Always align the left edge of the sheet with the left side of the feed slot.
16 Chapter 2 Setting Up the Printer