Canon K10158 User Manual page 22

Canon printer user manual
Table of Contents

Advertisement

FOLLOW THESE GUIDELINES WHEN STORING AND HANDLING
THE BATTERY PACK:
• A battery pack is not charged when purchased. You must charge the
battery pack for about 4 to 6 hours for it to reach full charge.
• For best results, use the battery pack at room temperature. At low
temperatures the capacity of the battery pack is diminished and it will
print fewer sheets between recharging sessions.
• Never attempt to recharge the battery pack with any device other than
the Universal AC Adapter AD-360U supplied with this printer.
• To avoid personal injury from an explosion, never expose the battery
pack to an open flame and never attempt to incinerate an old battery
pack.
• Used battery packs should be disposed of according to environmental
regulations in your country. For details, contact your Canon Authorised
Dealer or Canon representative.
• To avoid damaging the contacts on the corner of the battery pack,
avoid touching them with any metal object like a tool, jewellery, the
surface of a metal table, etc. Damaged contacts could cause leaking
and serious burns.
• To avoid personal injury from corrosive liquids, never attempt to
disassemble the battery pack.
• If any liquid from a leaking or broken battery pack gets into your eyes,
flush your eyes immediately with clean water and contact a physician.
• Never attempt to connect the battery pack directly to mains (house)
current or to a cigarette lighter socket in an automobile.
• Never attempt to use this battery pack for any purpose other than as a
power source for this printer.
• Never store a battery pack in a location above room temperature.
• Remove the battery pack immediately and contact your Canon
Authorised Dealer or Canon Representative if the battery pack shows
any signs of warping, releasing a strange odour, leaking fluid, or
overheating. However, do not be concerned if the battery pack feels
slightly warm during recharging; this is perfectly normal.
• If you intend to store the printer for a prolonged period (3 months or
more), remove the battery pack. Store the printer and battery pack in a
dust-free location away from direct sunlight.
• Always handle the battery pack with care to avoid dropping it and
damaging its casing and contacts.
Chapter 2 Setting Up the Printer
2
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents