Canon K10158 User Manual page 113

The table below shows the International Character Sets.
Hex
Dec
Country
0
1
2
3
4
5
6
7
8
9
10
11
12
13
64
The international character sets 8 to 13, and 64 can be selected only by
using the escape code ESC R.
EPSON character tables
Two character tables—the Italics character table and the Graphics
character table—are available in LQ mode. The Italics character table
has control codes in two places: between ASCII 0 and ASCII 31 and
also between ASCII 128 and ASCII 159. In addition, in the Italics
character table, characters between ASCII 160 and ASCII 255 are italic
characters of characters between ASCII 0 and ASCII 127, whatever
code page you select.
The Graphics character table has control codes only in one place:
between ASCII 0 and ASCII 31. All other characters are printable. The
characters between ASCII 32 and ASCII 126 are always as shown in the
table on the next page. The characters between ASCII 128 and ASCII
255 vary depending on your selected code page. The Graphics
character table shown on the next page is for when the code page is set
to 437 USA.
The control codes between ASCII 0 and ASCII 31 can be changed to
printable characters by using the ESC ( ^ control code.
When you select a code page to print characters and symbols of your
language, select the Graphics character table. Otherwise, the
characters and symbols between ASCII 128 and ASCII 255 are changed
to Italics characters.
112 Appendix B Code Pages and Character Sets
23 24 40 5B 5C 5D 5E 60 7B 7C
35 36 64 91 92 93 94 96 123 124
7D 7E A3 A4 C0 DB DC DD DE E0
125 126 163 164 192 219 220 221 222 224
FB FC FD FE
251 252 253 254