Canon K10158 User Manual page 45

6.
Insert the paper straight into the printer
Push the sheet in slightly and hold it in place for about two seconds.
The sheet will feed partially into the printer.
If the sheet is too narrow (less than 100 mm), or if the sheet is inserted
diagonally, the buzzer will beep once, the CHARGE/ERROR lamp will
light orange, and the printer will eject the paper from the feed slot. After
the sheet is inserted again correctly, the printer will reverse feed it
slightly and the buzzer will not beep. If POWER lamp is flashing, data
remains to be printed. Press the RESUME button to finish the print job.
7.
Start the print job with your software application.
44 Chapter 3 Paper Handling
(about 5 cm) until it stops.