Configuring Speed Dials Using The Configuration File; Saving Configured Speed Dials In A Cfg File; Table 3-6: Speed Dial Parameter - AudioCodes 420HD Administrator's Manual

http://arttel.ru
3.2.3.2
Parameter Name
provisioning/speed_dial_uri
3.2.3.3
Administrator's Manual
http://arttel.ru/shop/ip-telefony/ip-telefon-audiocodes-420hd

Configuring Speed Dials using the Configuration File

Note: The phone's speed dials can be defined in a simple text-based editor, placed on
a server (e.g., HTTP or FTP/TFTP), and then uploaded to the phone using the
Configuration File.
The Configuration File can include a link to a user-defined Speed Dial file, using the
provisioning/speed_dial_uri parameter. This allows you to upload speed dial settings to
the phone.
The Speed Dial file must include a list of speed dial configurations. The file must be a
simple text file that can be created using an Excel document and saved as a CSV file.
The syntax of the speed dial file is as follows:
<memory key>,<speed dial phone number>,<type>
where:
„ memory key denotes the speed dial memory key on the phone.
„
speed dial phone number denotes the phone number that is automatically dialed,
when the user presses the speed dial key.
„
type denotes the Speed Dial feature and must be set to "0".
Below is an example of a Speed Dial file:
1,4418,0
2,4403,0
3,039764432,0
4,4391,0
12,1234,0
¾
To configure a Function Key using the Configuration File:
„
Open the Configuration File page (Management tab > Manual Update >
Configuration File) and configure the parameter using the table below as reference.

Saving Configured Speed Dials in a cfg File

In the Web interface, after configuring Speed Dials you can save the configuration in a cfg
file on your computer and load it to other phones.
¾
To save Speed Dials in a cfg file:
„
In the Function Keys page (Configuration tab > Personal Settings menu > Function
Keys), click the Save Function Keys button; the configuration is saved in a .cfg file.
400HD Series IP Phone with Microsoft Lync

Table 3-6: Speed Dial Parameter

Description
The URI for retrieving the speed dial list. The speed dial list
must be included in a separate file that can be downloaded
to the phone during provisioning.
For example:
provisioning/speed_dial_uri=speed_dial_list.txt
Notes:
ƒ The speed dial file is downloaded after boot up and
periodically.
If the speed dial file is new, the phone reboots.
ƒ
ƒ For creating a Speed Dial file, see Section 3.2.3.2.
38 Document #: LTRT-09936