Operation - Danfoss PVG 32 Service Manual

6
Plug headsets into
headset
jacks
and ensure
connectors are
fully
seated.
OPERATION
1.
Push
the white on/off button,
it will
illuminate, indicating power "on".
2.
Turn the
system
volume control knob to approximately
1/3
turn from the off position.
3.
Adjust
headset
for
a
comfortable
fit.
Position
the
boom mounted microphone directly
in
front of your mouth, no more than
1/8
inch from your lips.
4.
Speak
into
the
microphone.
If
you hear yourself speaking through the earphone, you
are
ready to communicate.
If
you do not hear yourself through the earphone, check the
microphone switch located on the earcup to be sure
it
is in the "on" position.
Above
each headset
jack
on the Master
Shtion
and
RemotJHeadset Station is
a
headset
volume control. Adjust your individual volume control to
a
comfortable listening level.
Should more volume be required, increase the system volume by turning the system volume
control knob clockwise.
NOTE:
To prevent ambient noise from being fed into the
system
during periods of no communication,
press the microphone
switch
on the headset
to the
off position.
With
the microphone
circuit
turned
off,
the earphone
circuit remains active for monitoring
of
system.
19505P-43
(10-15)
2 af3