Daikin Altherma 3 R F Installer's Reference Manual page 224

10 | Configuration
Installer reference guide
224
a
This needs the following components in case of WLAN module:
a
a WLAN cartridge
WLAN module
b Router
c Smartphone + app
Configuration
To configure the Daikin Residential Controller app, follow the in-app instructions.
While doing this, the following actions and information are needed on the user
interface:
Mode: Turn AP mode ON (= WLAN cartridge/module active as access point) or OFF.
# Code
[D.1] N/A
Reboot: Reboot the WLAN cartridge/module.
b c
b c
The WLAN cartridge needs to be inserted in the
user interface. See the installation manual of the
WLAN cartridge.
The WLAN module needs to be installed by the
installer on the indoor unit (on the inside of the
front panel). See:
▪ Installation manual of the WLAN module
▪ Addendum book for optional equipment
Field supply.
The Daikin Residential Controller app needs to be
installed on the user's smartphone. See:
http://www.onlinecontroller.daikineurope.com/
Enable AP mode:
▪ No
▪
Yes
Description
ERGA04~08EA + EHVH/X04+08S18+23EA/EJ
Daikin Altherma 3 R F
4P629086-1A – 2021.11