Daikin Altherma 3 R F Installer's Reference Manual page 212

10 | Configuration
Installer reference guide
212
#
[9.9.1] [4-08]
[9.9.2] [4-09]
Limit when [9.9.1]=Continuous and [9.9.2]=Amp:
#
[9.9.3] [5-05]
Limits when [9.9.1]=Inputs and [9.9.2]=Amp:
#
[9.9.4] [5-05]
[9.9.5] [5-06]
[9.9.6] [5-07]
[9.9.7] [5-08]
Limit when [9.9.1]=Continuous and [9.9.2]=kW:
#
[9.9.8] [5-09]
Limits when [9.9.1]=Inputs and [9.9.2]=kW:
#
[9.9.9] [5-09]
[9.9.A] [5-0A]
[9.9.B] [5-0B]
[9.9.C] [5-0C]
Priority heater
This setting defines the priority of the electrical heaters depending on applicable
limitation. As no booster heater is present, the backup heater will always be
prioritised.
Code
Power consumption control:
▪ 0 No: Disabled.
▪ 1 Continuous: Enabled: You can set one
power limitation value (in A or kW) to which
the system power consumption will be
limited for all the time.
▪ 2 Inputs: Enabled: You can set up to four
different power limitation values (in A or kW)
to which the system power consumption will
be limited when the corresponding digital
input asks.
Type:
▪ 0 Amp: The limitation values are set in A.
▪ 1 kW: The limitation values are set in kW.
Code
Limit: Only applicable in case of full time
current limitation mode.
0 A~50 A
Code
Limit 1: 0 A~50 A
Limit 2: 0 A~50 A
Limit 3: 0 A~50 A
Limit 4: 0 A~50 A
Code
Limit: Only applicable in case of full time
power limitation mode.
0 kW~20 kW
Code
Limit 1: 0 kW~20 kW
Limit 2: 0 kW~20 kW
Limit 3: 0 kW~20 kW
Limit 4: 0 kW~20 kW
Description
Description
Description
Description
Description
ERGA04~08EA + EHVH/X04+08S18+23EA/EJ
Daikin Altherma 3 R F
4P629086-1A – 2021.11