Table of Contents
Advertisement
What is the Carrier Connect™ 33CONNECTSTAT43FX Thermostat?
Specifications
Power requirements
Network Requirements
Environmental
temperature range
Humidity range
Connections
Inputs
Outputs
Communications
Mounting
Overall dimensions
BACnet Support
Listed by
Carrier Connect™ Wi-Fi Thermostat 33CONNECTSTAT43FX
Installation Guide
24 Vac +/- 10% @ 3VA
Wi-Fi connectivity supports Wi-Fi: 802.11 a/b/g/n standards on 2.4 GHz networks
Operating: 32° to 104°F (0° to 40°C)
Storage: -40° to 135°F (-40° to 57°C)
Operating: 10% to 95%, non-condensing, 32° to 104°F (0° to +40°C)
Storage: 10% to 95%, non-condensing
Connectors P104 and P105. 2 banks of "finger friendly" spring type terminal blocks
intended to be wired by the end-user or installer
•
C - connection
•
R - connection
•
H - 0-10 Volt input
•
T - remote thermistor
Connections: Y3, O/B, Y2, Y1, G, W1, and W2
485 signal: A+ and B
Standard 4 x 2 in. electrical box using the 6-32 x 1/2 in. mounting screws and plastic
wall anchors provided
Width:
5.15 in. (13.1 cm)
Height:
3.25 in. (8.2 cm)
Depth:
0.95 in. (2.4 cm)
Conforms to the BACnet Application Specific Controller (B-ASC) Device Profile as defined
in ANSI/ ASHRAE Standard 135-2012 (BACnet) Annex L, Protocol Revision 14
FCC Part 15, Subpart J compliant
2
CARRIER CORPORATION ©2021
All rights reserved
Advertisement
Table of Contents
