Table of Contents
Advertisement
Note:
•
The user can confirm OFF TIMER during OFF TIMER
setting process by pressing SEND button.
•
If there are no other buttons pressed within 15 seconds,
OFF TIMER will be cancelled, and the LCD display will
return to show clock.
•
After Pressing OFF TIMER button, the LCD display
will show the last off timer set by user with blinking
hour number.
•
When ON/OFF TIMER is set, the present time is not
displayed.
•
Press CLOCK button to see present time after ON/OFF
TIMER was set. The LCD display will show present
time about 15 seconds and return to show ON/OFF
TIMER. If user press CLOCK button during the 15
seconds display of present time, the operation will be
CLOCK setting and return to ON/OFF TIMER.
•
In case of power failure, OFF TIMER will be automatically
cancelled as there is no electricity in the air-conditioner;
however, the set time on the remote control is still
displayed due to batteries. The user has to cancel
and set OFF TIMER again or press SEND button to
reactivate OFF TIMER when the electricity is back to
normal conditions.
POWERCOOL Mode
POWERCOOL mode rapidly maximizes the cooling
capacity in COOL or DRY mode. With this simply mode, the
user can easily get the maximum cooling capacity
and comfort.
-
Press POWERCOOL button. "POWERCOOL" will
be shown on the display.
-
The air-conditioner will accelerate capacity up totally
20 minutes or until room temperature is lower than 18
-
When POWERCOOL mode completely operates or
is cancelled, "POWERCOOL" will disappear from
the display and return to the former settings before
POWERCOOL mode.
-
To cancel POWERCOOL mode, press POWERCOOL
button again.
Note:
•
The LCD display will not show fan speed and set
temperature.
•
Fan speed and set temperature cannot be changed
while POWERCOOL mode is selected.
20
Handheld Remote Control
•
SLEEP Mode
SLEEP mode automatically and gradually adjusts room
temperature to provide great comfort during your rest.
Cooling
-
-
-
-
Heating
-
-
-
O
C.
-
In case of power failure or changing operation mode,
POWERCOOL mode will be automatically cancelled.
Press SLEEP button.
will be shown on the display.
After one hour operation of SLEEP mode, the unit
will automatically raise set temperature by 0.5
After one and half hour operation of SLEEP mode,
the unit will automatically raise set temperature by
0.5
O
C again and
on the display will disappear.
To cancel SLEEP mode, press SLEEP button again.
Press SLEEP button.
will be shown on the display.
After one hour operation of SLEEP mode, the unit
will automatically reduce set temperature by 0.5
After one and half hour operation of SLEEP mode,
the unit will automatically reduce set temperature
by 0.5
O
C again and
on the display will disappear.
To cancel SLEEP mode, press SLEEP button again.
O
C.
O
C.
ACYSTAT-IOM-EN
Hide quick links:
Advertisement
Table of Contents
