Trane LCD Control Series Owners & Installation Manual page 10

TURBO Mode
TURBO mode rapidly maximizes the cooling capacity in
COOL or DRY mode. With this simply mode, the user can
easily get the maximum cooling capacity and comfort.
- Press MENU button and select TURBO mode setting
by pressing either or
- The air-conditioner will accelerate capacity up totally
20 minutes or until room temperature is lower than 18
- When TURBO mode completely operates or is cancelled,
"TURBO" will be disappeared from the display and
return to the former settings before TURBO mode.
- To cancel TURBO mode, either press MODE button
or select TURBO mode and press MENU button again.
Note:
• The LCD display will not show fan speed and set
temperature.
• Fan speed and set temperature can not be changed while
TURBO mode is selected.
• In case of power failure, TURBO mode will be
automatically cancelled.
SLEEP Mode
SLEEP mode automatically and gradually adjusts room
temperature to provide great comfort during your rest.
Cooling
- Press MENU button and select SLEEP mode by
pressing either or
- Press MENU button again to confirm SLEEP mode.
will be shown on the display.
- After one hour operation of SLEEP mode, the unit will
automatically raise set temperature by 0.5
- After one and half hour operation of SLEEP mode, the
unit will automatically raise set temperature by 0.5
again and on the display will disappear.
- To cancel SLEEP mode, either press MODE button
or select SLEEP mode and press MENU button again.
10
Display Unit and Receiver Board
LCD Wired Control
.
.
O
C.
O C.
Heating
- Press MENU button and select SLEEP mode by
pressing either
- Press MENU button again to confirm SLEEP mode.
will be shown on the display.
- After one hour operation of SLEEP mode, the unit will
automatically reduce set temperature by 0.5
- After one and half hour operation of SLEEP mode,
the unit will automatically reduce set temperature by
0.5 O C again and
- To cancel SLEEP mode, either press MODE button
or select SLEEP mode and press MENU button again.
Note:
O
C
• Set temperature shown on the display still show the
setting without 1
1 O C in the memory.
• will disappear from the LCD display when SLEEP mode
completely operates, after one and half hours, or is
cancelled.
• In case of power failure, SLEEP mode will be automatically
cancelled.
or .
on the display will disappear.
O C added/reduced but it will plus/minus
ACYSTAT-IOM-EN
O C.