Trane LCD Control Series Owners & Installation Manual page 19

Note:
• In AUTO mode, the system will automatically switch
between COOL mode and HEAT mode to maintain
equally room temperature and set temperature.
CLOCK Setting
- Press CLOCK button to set clock and
shown on the display with blinking hour number.
- Press either or
present hour.
- Press CLOCK button again to confirm hour setting
and minute number will be blinking.
- Press either or
present minute.
- Press CLOCK button again to confirm minute setting;
hour and minute number will stop blinking and the
set time will be shown on the display.
Note:
• If there are no other buttons pressed within 15 seconds,
clock setting will be cancelled.
• The user can confirm CLOCK setting during CLOCK
setting process by pressing SEND button.
Timer Operation
Once you select the timer operation, the settings are
saved in the remote control. Thereafter, the air conditioner
will start operating under the same conditions when you
simply push the POWER button on the remote control.
ON TIMER Setting
You can set ON TIMER to start the unit automatically at
any desired time up to 24 hours as real time.
- Press ON TIMER button. ON symbol will be shown
on the display with blinking hour number.
- Press either or
present hour.
- Press ON TIMER button again to confirm hour setting
and minute number will be blinking.
- Press either or
- Press ON TIMER button again to confirm minute
setting. Hour and minute number will stop blinking.
The unit is now standby for starting air-conditioner
automatically at the set time.
- To cancel ON TIMER, press ON TIMER button again.
ACYSTAT-IOM-EN
Handheld Remote Control
will be
button to set the clock to the
button to set the clock to the
button to set the clock to the
button to set the desired minute.
Note:
• The user can confirm ON TIMER during ON TIMER
setting process by pressing SEND button.
• If there are no other buttons pressed within 15 seconds,
ON TIMER will be cancelled, and the LCD display
will return to show clock.
• After Pressing ON TIMER button, the LCD display
will show the last on timer set by user with blinking
hour number.
• When ON/OFF TIMER is set, the present time is not
displayed.
• Press CLOCK button to see present time after ON/OFF
TIMER was set. The LCD display will show present
time about 15 seconds and return to show ON/OFF
TIMER. If user press CLOCK button during the 15
seconds display of present time, the operation will be
CLOCK setting and return to ON/OFF TIMER.
• In case of power failure, ON TIMER will be automatically
cancelled as there is no electricity in the air-conditioner;
however, the set time on the remote control is still
displayed due to batteries. The user has to cancel
and set ON TIMER again or press SEND button to
reactivate ON TIMER when the electricity is back to
normal conditions.
OFF TIMER Setting
You can set OFF TIMER to stop the unit automatically
at any desired time up to 24 hours as real time.
- Press OFF TIMER button. OFF symbol will be shown
on the display with blinking hour number.
- Press either or button to set the desired hour.
- Press OFF TIMER button again to confirm hour setting
and minute number will be blinking.
- Press either or button to set the desired minute.
- Press OFF TIMER button again to confirm minute
setting. Hour and minute number will stop blinking.
The unit is now standby for stopping air-conditioner
automatically at the set time.
- To cancel OFF TIMER, press OFF TIMER button again.
19