Trane LCD Control Series Owners & Installation Manual page 18

Operation Mode
FAN Mode
- Press Mode button to select the operation mode.
- "FAN" will be shown on the display when FAN mode
is selected.
- Press FAN SPEED button to select the desired fan
speed level and the display will show Auto, Low,
Medium, and High respectively.
Auto --> Low --> Medium --> High
Note:
• In FAN mode, the LCD display will not show set
temperature and cannot adjust set temperature, SLEEP,
ECONO, and POWERCOOL mode.
COOL Mode
- Press Mode button to select the operation mode.
- "COOL" will be shown on the display when COOL
mode is selected.
- Press either or
temperature between 15
- Press FAN SPEED button to select the desired fan
speed level and the display will show Auto, Low,
Medium, and High respectively.
Auto --> Low --> Medium --> High
DRY Mode
- Press Mode button to select the operation mode.
- "DRY" will be shown on the display when DRY mode
is selected.
- Press either or
temperature between 15
- Press FAN SPEED button to select the desired fan
speed level and the display will show Auto, Low,
Medium, and High respectively.
18
Handheld Remote Control
button to set the desired
O C to 30 O C.
button to set the desired
O O
C to 30 C.
Auto --> Low --> Medium --> High
Note:
• In DRY mode, if the compressor/valve stops working, fan
motor will be stopped; fan motor will operate when
compressor/valve operates.
• ECONO mode cannot be activated during DRY mode
operation.
HEAT Mode
- Press Mode button to select the operation mode.
- "HEAT" will be shown on the display when HEAT
mode is selected.
- Press either or
temperature between 15
- Press FAN SPEED button to select the desired fan
speed level and the display will show Auto, Low,
Medium, and High respectively.
Auto --> Low --> Medium --> High
AUTO Mode
- Press Mode button to select the operation mode.
- "AUTO" will be shown on the display when AUTO
mode is selected.
- Press either or
temperature between 15
- Press FAN SPEED button to select the desired fan
speed level and the display will show Auto, Low,
Medium, and High respectively.
Auto --> Low --> Medium --> High
button to set the desired
O C to 30 O C.
button to set the desired
O O
C to 30 C.
ACYSTAT-IOM-EN