Troubleshooting
If you have followed the instructions carefully and your faucet still does not work
properly, take the following coorective steps:
P R O B L E M
Leakage under the
handle
The aerator has an
irregular or reduced
completely
water.
Close
Care & Maintenance
*To keep the product clean & shining, follow the steps below:
1.
Rinse with clean water & dry with a soft cloth
2.
Do not clean with soaps, acid, polish, abrasives, or harsh cleaners
3.
Do not use cloth with a coarse surface
4.
Unscrew the aerator and clean when necessary
*This installation manual is subject to change without further notice.
10
C A U S E
Bonnet nut (7) has
Hexagon Nut
9
come loose
11
12
13
The aerator is dirty or
Cartridge may need to
be adjusted or replaced
hose connectors is dirty. water valve and unscrew the
90˚
25˚
Left
Open
Hot Water
A C T I O N
Remove the cover button (11).
Loosen screw (10) with hex
wrench (21). Remove the
handle (9). Unscrew cap (8) (by
hand only). Tighten bonnet nut
(7) with an adjustable wrench
Remove the aerator and
check for debris.
Ensure that the rubber
washer is properly installed.
Hot
Water
Remove the cover button (11).
Loosen screw (10) with hex
wrench (21). Remove the
handle (9). Unscrew cap (8) (by
hand only). Tighten bonnet nut
(7) with an adjustable wrench.
Remove the cartridge (6).
Check for cracks
hose connectors from water
supply lines. Clean the
Push
washer in the water lines with
hot water, removing any debris
or calcium build up
Cold
Water
10