Table of Contents
Advertisement
WeB InTerfACe
sections
table of contents
Administrator
An administrator has unrestricted access to all windows and settings
and can "take over" any active session . An administrator can change the
name and password and target server permissions of all users .
User
A user can access/control permitted target servers, but cannot use the
advanced mouse settings .
A user has no access to the web-configuration interface .
View only
"View only" can view the screen of the currently accessed target server
without keyboard and mouse control . A "view only" indicator appears on
the viewer's local mouse pointer .
OmniView
SMB CAT5 216/232 Switch
®
1
2
3
4
Adding a user
To add a user:
1 .
Click
and type a name and a password . The password
must be at least six characters (letters or numbers), and must not
include the user name, even if other characters are added .
note! The following "special" characters: &, <, >, ", {, and } cannot
be used for either the user name or password .
Depending on the security level chosen, the user name and
password parameters are different . See the "Security > Settings"
section on page 21 .
2 .
Select the permission type from the "Permission" box .
3 .
Click
and the user will appear in the list of users . The
Permission column shows the user level (Administrator, User, and
View Only) . The Status column shows whether the user is blocked
or unblocked (explained in the "Blocking a user" section) .
19
5
Advertisement
Table of Contents
