Table of Contents
Advertisement
WeB InTerfACe
sections
table of contents
Administration > Server Access list
By default, access is allowed to all servers for administrators . For other
users, define the access rights of each user separately .
To do so:
1 .
From the menu, click "Server Access List" . The Access List
Configuration window will appear (see Figure 18) .
Figure 18 Server Access List Configuration
2 .
Select a user from the user drop-down menu .
OmniView
SMB CAT5 216/232 Switch
®
1
2
3
4
3 .
Check the target servers the user can access (according to his or
her access permissions) . To select all target servers, click
4 .
Click
to save the selection .
5 .
Repeat the steps above for additional users .
Security > Settings
Configure the security features, such as Account Blocking, Password
Policy, and Idle Timeout, as explained below .
From the Security section, click "Settings" . The "Security > Settings"
page appears (see Figure 19) .
Figure 19 Security Settings
21
5
.
Advertisement
Table of Contents
