Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Dancover GH140055
Summary of Contents for Dancover GH140055
- Page 1 Manual Arched Cover f/Raised Garden Bed 0,75x1,5x0,45m 21-04-2021...
- Page 2 COVER FOR RAISED GARDEN BED NOTE: The lower bed is supplied separately, in the photo only an application example. Parts list Side parts 783 mm Front part 730 mm Arches 1230 mm Reinforcements between the arches 688 mm Corners for connecting the rear and side parts with 4 holes 40x40 mm Rear and side reinforcements (folded ends) Hinges 50x40 mm Corners for polycarbonate mounting 40x30 mm...
- Page 3 Installation instruction Arrange the parts as shown in the figure. 783 mm long parts on the sides (1) and 730 mm long parts on the ends (2). Join the corner parts of the structure (1; 2) with the corners for connecting the rear and side parts (5).
- Page 4 Fasten the corners (8) for fixing the polycarbonate to the rear arches with M5x16 mm screws (9) and M5 nuts (11). Fasten the hinges to one of the side parts (1) with M5x16 mm bolts (9) and nuts (11). Tighten the structure using a screwdriver and 8 mm head. Place the assembled bed cover on an existing metal bed.
- Page 5 Use a sharp knife to trim the protruding polycarbonate sheets (14) to the structure. Cover the structure with a transparent tarpaulin (15). Level so that the entire structure is evenly covered. The awning is attached to the structure with M5x40 mm screws (10) with M5 gaskets (11) and nuts (12).
- Page 6 Head office: Dancover A/S For more information Lyngevej 16A, Nørre Herlev please visit: 3400 Hillerød www.dancovershop.com Denmark...
Need help?
Do you have a question about the GH140055 and is the answer not in the manual?
Questions and answers