Gait up GO Instructions For Use Manual page 49

Be careful not to pinch the skin of the Participant or your finger when fixing the
sensor into the clip accessory and attaching the clip to the Participant.
The clip accessories must not be in contact with the participant's skin.
When the sensor preparation is done and the participant is ready to start the test, select "Ready" and
read the test instructions in the Gait Up GO mobile application.
Perform the clinical test
The Gait Up GO mobile application displays the instructions explaining how to perform the selected
test. Please read the notes below before starting the test.
NOTE: For each of the tests contained in the Gait Up GO mobile application it is important to not move
before tapping "Go".
NOTE: Some tests are performed in several steps. In this case, a new instruction screen will appear
together with an explanation of the next step. Tap "Go" to start the next part of the test.
ENGLISH
Fig 63. Sensor fixation using the shoe lace clip
Fig. 64. Read instructions
49/84