M O Bile A P Plication - Gait up GO Instructions For Use Manual

● generate clinical reports showing the main outcome indicators for the Medical Professionals to
interpret it.
● manage Participant profiles and access generated reports
● update the Firmware of the Physilog6 sensor device accessory
● provide access to the electronic version of the IFU and the quick start guide
The Gait Up GO Mobile application runs on off the shelf Android and iOS mobile phones and tablets.
The Gait Up GO Mobile application provides guidance to the users on how and where to place the
Physilog6 sensor device on the Participant's body (see section 4 for further details)
Physilog6 sensor device
Physilog 6 sensor device is an accessory of the Gait Up GO medical device intended to measure human
movement parameters such as acceleration, orientation and angular velocity, barometric pressure
and direction, strength and relative change of a magnetic field.
The Physilog6 sensor device is operated via the Gait Up GO mobile application to perform the
following actions:
● Connect the sensor device to the phone/tablet via BLE
● Stream raw data of human movement to the Gait Up GO mobile application
● Disconnect the sensor device from the phone/tablet via BLE
The Physilog6 sensor device has a function called "shake up to wake up". After 30 seconds of no
activity (i.e. sensor device not moving and not connected to the Mobile Application), the Physilog6
goes into stand-by mode. By lightly shaking the device, the BLE turns on and the sensor device and the
mobile application automatically connect over Bluetooth.
The Physilog6 accessory device is composed of:
ENGLISH
Fig 3. Physilog 6 sensor
17/84