Gait up GO Instructions For Use Manual page 47

Any of the tests displayed in the list of the participant for which the assessment session is open can be
selected. Tests which were already performed during the same day are marked as completed but can
be repeated.
Fig 57. Vertical jump 1 leg test selection - iOS Fig 58. Vertical jump 1 leg test selection -
Android
After the test selection, the application is "Preparing the Physilog PHY6_NNNN". If any issue is
encountered in this part, check the troubleshooting section 6.
Fig 59. Sensor preparation before the test - iOS Fig 60. Sensor preparation before the test - Android
Sensor attachment
Depending on the test choice, instructions and sensor locations are different. Be careful to correctly
place the sensor at the location indicated in the test instructions provided inside the Gait Up GO
application. For any question or feedback contact the Gait Up support team at ​ s upport@gaitup.com​ .
ENGLISH 47/84