Gait up GO Instructions For Use Manual page 29

Fig 8. Physilog section after the first connection to the application - iOS/Android
Check the serial number of the Physilog®6 sensor device on the device label located on the back of the
sensor. Serial numbers have the following format: PHY-06-2020-01-NNNN
Fig 9. Physilog label with the serial number surrounded by blue and
the four unique numbers to enter in the Gait Up GO mobile application
surrounded by red
In the text field appearing on the Mobile Application screen, introduce the last four numbers (NNNN),
then click on "Link" in order to pair the device. A pop up with a confirmation should appear after the
device is paired.
NOTE: the Bluetooth of the mobile phone / tablet needs to be activated. For mobile devices/tablets
operating with Android OS, the localisation must in addition be activated to be able to use Bluetooth
low energy. The Gait Up GO application does not access your localisation information.
NOTE: to "wake up" the Physilog6 sensor from stand-by mode when it is not connected, lightly shake
the device to turn on its BLE ("shake up to wake up").
NOTE: Using the "Purchase Physilog" button it is also possible to visit the Gait Up webshop in order to
buy a Physilog6 sensor device. In order to be able to use the Gait Up GO medical device, it is necessary
to have one Physilog6 sensor.
ENGLISH 29/84