Canon IMAGECLASS D700 Series Printer Manual page 69

iR1210G_iR1230G.book Page 20 Tuesday, June 24, 2003 2:22 PM
Paper Selection Tab Paper Selection Tab Paper Selection Tab Paper Selection Tab
I
This printer driver supports three custom paper sizes. Using the custom forms defined on the
Forms tab in the print server's Properties dialog box, you can add information about the
custom paper sizes. Form definitions must conform to the printer's specifications.
Selected Paper shows the three sizes names.
Change Paper... opens the Change Paper dialog. This dialog contains a listing of the
available papers, and their definitions (Available Paper has Height: 127.0–355.6 mm and
Width: 76.2–215.9 mm) that were defined in the Forms tab in the Print Server Properties
dialog box (the Print Server Properties dialog box can be accessed by selecting Server
Properties from the File menu of the Printers (in Windows XP, Printers and Faxes) folder).
Only sizes that conform to the printer's specifications are listed as available. When you choose
a size in the list and then click OK, the size information is copied to the selected paper in the
Selected Paper list on the Paper Selection tab.
3
3-20